The printer Epson WF 7210 delivers excellent print-shop quality. The print out size of 13” x 19” with color graphics comes out borderless. With the best available speed and versatility, this wide-format inkjet printer has a 500-sheet capacity dual trays, rear feed for envelopes, and specialty paper. This high-performance Epson WF 7210 setup printer includes duplex printing and a 2.2” LCD for easy setup and navigation.
Epson Wf 7210 Driver
Installing the Epson WF 7210 driver marks the beginning of the printer setup. The driver file installs everything needed to run the printer. The combo includes printer driver, ReadyInk agent, and software updater. The Epson WF 7210 driver can be downloaded based on the OS and its version. Click the Download button below to download the required driver.
Epson Wf 7210 Manual
Guidelines to Epson WF 7210 setup, install drivers, and operate the printer are given in the user guide. The comprehensive Epson WF 7210 manual explains in detail the instructions of controlling the printer and assigning it tasks. Settings configuration can also be referred to in the Epson WF 7210 manual. This guide for reference has been put in PDF form. Download it from here and save it to your desktop.
Epson Wf 7210 Unboxing
Get ready to install and setup the printer, configure it, and proceed to print with the unboxing and other instructions provided below.
How to Setup Epson Wf 7210
Take away the protective material within the printer.
Attach the power cord to the rear of the printer and the electric outlet.
Switch on the printer.
Set language and time on the printer’s control panel.
Access the ink cartridge area beneath the cover.
Shake the cartridge gently and unwrap it.
Take off the yellow tape from the cartridge.
Insert the ink cartridge into the corresponding holder and press it down until it clicks into place.
The printer begins charging ink which takes about six minutes.
Feed paper into the paper cassette and adjust the width guides.
Push the cassette back into the printer.
Configure the paper and print settings on the printer’s control panel.
Run the file on the printer installation CD.
Establish the selected connection following the displayed instructions.
The Epson WF 7210 setup is completed. And it is all set to print now.
Epson Wf 7210 Wireless Setup
Power on the router and the printer.
It is necessary to keep the printer within the range of the router.
Tap the Home button and select Wi-Fi Setup Wi-Fi Setup Wizard.
Move with the arrow buttons to select the wireless network name. Press OK for Epson Wf 7210 wireless setup.
If the name is not displayed, hit Other SSIDs and enter the network name on the displayed keyboard.
Type the network password. Select OK to confirm the Wi-Fi settings displayed.
Print the network status report and check the Wi-Fi signal strength to know the current status of Epson Wf 7210 wireless setup.
Infer that the connection is established when you see the wireless icon on the Epson WF 7210 setup printer's screen.
Epson Wf 7210 Double Sided Printing
Load paper in the input tray or ADF of Epson WF 7210 setup printer.
Select between Auto ( Long-edge binding) and Auto (Short-edge binding) for Epson Wf 7210 double sided printing.
Go to Settings and set the Binding Edge, Binding Margin, Start Page, and click OK.
Hit the Print Density window to perform Epson Wf 7210 double sided printing.
Choose the type of document you are printing as the Document Type setting.
Pick the Adjustments options and configure them.
Return to the Main tab.
Proceed to print a test copy to test the input settings.
How To Print Photos On Epson Wf 7210
Load the photo paper in the tray and adjust the edges accordingly.
Once the cassette is pushed back in, configure the paper settings on the printer’s control panel.
Open the photo for printing.
Go to the command “print” in the application.
Pick your printer as the machine you want to use.
On the Main tab of the print settings window, set the paper source and paper size.
If you're going to print a borderless photo, select Borderless.
Choose the orientation of your document.
Select the Quality setting that matches the print quality you prefer.
After the print preview, hit Print to print photos on Epson WF 7210 setup printer.
Epson Wf 7210 Troubleshooting
Printer status messages are displayed on the printer's LCD. Finding solutions for the specific error codes and troubleshooting the printer solves many errors. Resetting the printer settings to its factory defaults fixes many software problems. The portion below describes a few of the most common errors on Epson WF 7210. Improve the print quality and maintain the printer's optimal performance by often performing Epson Wf 7210 troubleshooting as and when problem occur.
Epson Wf 7210 Won't Connect Wireless
Power down the router/access point and hold on for 10 seconds.
Switch it on and place the Epson WF 7210 setup printer close to the router.
Remove any electromagnetic devices near the router to solve Epson Wf 7210 won't connect wireless.
Check if the SSID on the network connection report matches the label on the router.
Double-check if the entered password is correct since it is case-sensitive.
Change the type of security on your router and reset the printer's network settings to solve Epson Wf 7210 won't connect wireless.
See that the IP address does not conflict with other devices to fix Epson Wf 7210 troubleshooting.
Reinstall the printer driver to reset the network settings.
Epson Wf 7210 Not Printing
The printer must be kept on a flat and horizontal table if it is tilted.
Replace the empty cartridges with fresh ink cartridges to solve Epson Wf 7210 not printing.
Make sure that the yellow tapes on all the cartridges have been removed.
Configure the paper size, orientation, and layout settings as preferred.
Input the type of paper fed into the printer to solve Epson Wf 7210 troubleshooting.
Print the nozzle check pattern to locate clogged nozzles.
Run Print Head Cleaning Utility in the printer to fix Epson Wf 7210 not printing.
Use the paper that meets the requirements of the printer.
Validate the network connectivity of the router.
Reboot the network device and then reconnect the printer to the router.
Epson Wf 7210 Won't Print Black
Confirm that the paper type settings match the loaded paper type.
Uncheck the Black/Grayscale or Grayscale settings in your Epson WF 7210 driver.
Make sure there are no clogs in the print head with a nozzle check to solve Epson Wf 7210 won't print black.
Tap Maintenance Print Head Nozzle Check Start.
Look at the printed pattern to see if there are gaps.
Select O if you don’t see any gaps.
If you see gaps and fainted pattern, select X to continue.
Continue with the on-screen instructions to clean the printhead.
Insert new cartridges in place of the dried out and old ones to fix Epson Wf 7210 won't print black.
Or clean the print head directly by clicking Maintenance Print Head Cleaning.
Touch Start to run the cleaning process and then Check.
Begin printing once the print head is clean on Epson WF 7210 setup printer.
Epson Wf 7210 Automatic Document Feeder Not Working
Check if the Automatic Document Feeder is installed correctly.
Pick either the Office Mode or the Professional Mode in Epson Scan.
Confirm that the ADF-Single sided or ADF-Double sided is chosen as the Document Source in Epson Scan.
Open and close the ADF. Try again.
Remove any jammed paper in the and then restart Epson Scan to fix Epson Wf 7210 troubleshooting.
Open the right cover and pull the jammed paper out of it gently.
Once the jammed paper is removed, close the Epson WF 7210 setup printer ADF cover.