Epson WF 2630 Driver

The novel features and specifications of the Epson printer are aided by the Epson WF 2630 Driver. The Epson WF 2630 Driver combo package contains the printer driver, scanner driver & EPSON Scan Utility, Epson Event Manager, and Network Installer. Only after Epson WF 2630 Driver installation can the print jobs and other printer tasks be sent from the computer. Hit the Download button provided below to download the Epson WF 2630 Driver compatible with your printer model.

Epson WF 2630 Driver Download
Epson WF 2630 Driver

Epson WF 2630 Manual

Make use of the user-friendly Epson WF 2630 Manual guide available in PDF format to know more about Epson Workforce WF 2630 printer features and ways to use them. Using Epson WF 2630 Manual, The entire sphere of its features should be used. Save it to a particular location on your computer such that you can easily access it when needed. A separate section on Epson WF 2630 Manual for troubleshooting comes which fixes common printer issues.

Epson WF 2630 Manual Download

Epson WF 2630 Unboxing

If you’re about to set up the Epson printer for the first time, go ahead and read below. We have explained in detail the Epson WF 2630 Printer Setup process, wireless connections, and basic printer functions. The important accessories within the printer carton should be saved for installation and future purpose. Use the USB cable or your local wireless network to establish a connection with the computer and send print jobs from it.

Epson WF 2630 Printer Setup

  • Take the printer out of the carton and lift it with the handles.
  • Remove the blue tapes present outside and within the Epson Workforce WF 2630 printer.
  • Attach the power cord into the corresponding port of the printer for Epson WF 2630 Printer Setup.
  • Plug the other end of the power cord into the electrical outlet.
  • Turn on the printer with the Power button. Press the release bar underneath the control panel and lower it.
  • Pull the receiving paper tray and the paper cassette outward.
  • Slide the width guides to the extreme ends and load the cassette with paper for Epson WF 2630 Printer Setup.
  • Shake the ink cartridges before unwrapping to improve the ink fluidity.
  • Load the cartridges into the same colored holders after removing the protective tapes from them.
  • Charge the ink supply system by pressing the Start button.
  • The Epson WF 2630 Printer Setup is ready to be use once the driver installation is completed.
Epson WF 2630 Printer Setup

Epson workforce WF 2630 Scan

  • Open the printer software on your computer.
  • Connect your printer and computer over the same wireless network.
  • Navigate to select the Epson workforce WF 2630 Scan option on the printer’s control panel.
  • Tap OK. Choose Scan to PC and the type of scan format you prefer.
  • In the Type of connection option, choose Wireless.
  • Keep the original on the scanner glass or ADF and change the Epson workforce WF 2630 Scan settings.
  • Upon pressing Start, the scanning begins. The scan output is saved to the default location on your computer.

Epson WF 2630 Scan to PDF

  • Keep your original document or photo on the scanner.
  • On the Epson Workforce WF 2630 printer software on your computer, choose the type of original.
  • Pick the destination setting and hit Preview. Select your scan area for Epson WF 2630 Scan to PDF.
  • Load your first page on the top of the originals if you’re using the ADF.
  • Click Scan. The File Save Settings window opens for Epson WF 2630 Scan to PDF.
  • Select PDF in the Type setting option. Find the Paper Size, Orientation, Margin, and Compression Level setting on the window.
  • Upon clicking the Options button, the Epson PDF Plug-in Settings window appears. Configure settings to match your preferences. Hit OK.

Epson WF 2630 Double Sided Printing

  • Launch the Epson Workforce WF 2630 printer software on your computer.
  • Click Main Text. Choose a paper Type & paper size setting.
  • Hit Page Layout Double-sided Printing
  • Open the Margins dialog box by clicking Margins.
  • Input the edge of the paper where the binding will be placed.
  • Pick the Unit setting > OK and save the settings.
  • Feed paper into the input cassette and send the print job from the printer software.

How to Change Ink On Epson WF 2630

  • Power on your printer. If you see a message indicating empty ink cartridges, get ready to replace them.
  • Note down the cartridges to be replaced and tap OK.
  • Select Replace Now if you have the cartridges prepared and follow How to Change Ink On Epson WF 2630.
  • Pull open the printer’s lid and pinch the cartridge tabs.
  • Take it out. Gently shake the cartridge before opening.
  • Unwrap the new cartridge and remove the yellow tab from it.
  • Position it into the corresponding colored holder until you hear a click.
  • Push the Start button after closing the scanner unit.
  • After a few minutes of proceeding How to Change Ink On Epson WF 2630, a message confirming ink replacement is displayed.

Epson WF 2630 Troubleshooting

Epson WF 2630 encounters issues such as not printing, not scanning, jams, etc. Locating the root cause of the issue can be easily traced since many issues come with error codes. Fixing methods for corresponding error codes have been provided. Though device reset is the magic solution for all Epson Workforce WF 2630 printer problems, there are also other fixes that easily clears off all the errors.

Epson Workforce WF 2630 Not Printing

  • Check if there are any errors displayed on the printer’s LCD screen for Epson WF 2630 Troubleshooting.
  • Press the Home button and select Setup Maintenance Printhead Nozzle Check.
  • Find the blocked nozzles on the report with the colored grids.
  • If you see any gaps or blurred lines, choose Clean the printhead option.
  • Release the printhead assembly with the plastic lever.
  • Use a plastic syringe to saturate the printhead sponges with distilled water.
  • Let the Epson Workforce WF 2630 printer soak overnight and turn it on the next day.
  • Print pages with dense text and images until your prints come out clean.

Epson WF 2630 Error 0xf1

  • Turn off the printer. Raise the printer’s lid.
  • Move the print head assembly all the way to the left and then to the right.
  • Leave the printer off overnight and use it the next day to clear the error.
  • Head to Control Panel Troubleshooting Printers.
  • Diagnose and clear errors within this section.
  • Move to Devices and Printers Right-click the Epson printer > Remove Device.
  • Restart your computer or laptop and add the printer to your computer’s Devices to solve Epson WF 2630 Troubleshooting.

Epson WF 2630 Won’t Scan

  • Check if the power supply to the printer is consistent and steady.
  • Power off the printer and computer. Check if the USB cable connection between them is secure.
  • Make sure that the computer is not in standby mode (Windows) or sleep mode (Mac OS X).
  • Restart the EPSON Scan software on your computer for Epson WF 2630 Troubleshooting.
  • Uninstall the printer software and download its latest version.
  • Run the file and launch the software. Try scanning now.
  • Place the documents and photos correctly on the scanner’s document table.

Reset Epson WF 2630

  • Reset the printer’s settings to their factory defaults. You can also choose which settings are to be changed.
  • Make use of the Up and Down arrow buttons to select Setup OK.
  • Select Restore Default Settings OK.
  • Scroll down to see three options: Network Settings, Fax Settings, & Clear All Data and Settings.
  • Highlight the preferred option and select it for Epson WF 2630 Troubleshooting.
  • See the confirmation screen and press the Up arrow button to reset the selected settings.
  • To cancel the operation, push the Down arrow button on Epson Workforce WF 2630 printer.