Epson Surecolor P400 Driver

Find here the latest version of the Epson SureColor P400 driver for your Operating System. The Drivers and Utilities Combo Package includes Printer Driver, Epson Print CD, Software Updater, and Network Installer.

Epson Surecolor P400 Driver Download
Epson Surecolor P400 Driver

Epson Surecolor P400 Manual

Click below to download the Epson surecolor p400 setup printer manual and save it to your computer. Just clicking at the required topic takes you to the associated section.

Epson Surecolor p400 Manual

Epson Surecolor P400 Printer Setup

  • Open the top cover and discard the material within it.
  • Insert the power cable into the printer and power it up with the electric socket.
  • Press down the Power button to turn it on.
  • Pull up the ink cartridge cover and unwrap the ink cartridges.
  • Remove the yellow tape off the cartridge.
  • Close the ink cover and then the printer cover.
  • Secure the ink bottle for later use.
  • Press the Ink button and leave the Epson surecolor p400 setup printer untouched for about 4 minutes.
  • Extend the paper support and feed paper against the right edge.
  • Hold the button on the edge guide and move it to the edge of the paper.
  • Install the driver with the downloaded file or the installation CD.
  • Establish the preferred connection and proceed to print.
Epson Surecolor p400 Troubleshooting

Epson Surecolor P400 Wi-Fi Setup

Epson Surecolor p400 Wi-Fi Setup
  • Press the WPS button on the router/access point.
  • Hold down the Wi-Fi button on your printer for 3 seconds for Epson surecolor p400 wi-fi setup.
  • Infer a successful connection if the network light turns blue.
  • Tap the Network Status button on the Epson surecolor p400 setup printer to print the status sheet.

Epson Surecolor P400 Troubleshooting

The lights on the printer’s control panel indicate the printer’s status and conditions. Solutions to printer issues can be found under the troubleshooting section. Paper feed problems such as paper jam and incompatibility can be solved easily with a few adjustments on the printer. Settings configured on the printer might also cause issues if they aren’t in sync with the input media. Below are the commonly occurring Epson Surecolor p400 Troubleshooting problems and their solutions.

Epson Surecolor P400 Not Printing

  • Run a print head nozzle to detect any clogs.
  • Place the Epson surecolor p400 setup printer on a perfectly horizontal surface.
  • Replace the ink cartridges only when the printer is switched off while solving Epson Surecolor p400 not printing.
  • Check if the cables are connected securely at both the devices.
  • Do not use any hubs while making connections.
  • See if any test page can be printed.
  • Set your Epson printer as the default printer on your computer for fixing Epson Surecolor p400 not printing.
  • Verify that the printer port setting matches the printer’s connection port for Epson Surecolor p400 Troubleshooting.

Epson Surecolor P400 Not Connecting To Wi-Fi

  • Make sure that your network name contains only non-ASCII characters.
  • Reinstall the printer software and launch EpsonNet again for Epson Surecolor p400 Troubleshooting.
  • Reset the network settings to their factory defaults.
  • Set the router to work in dual-band (2.4GHz and 5GHz) mode to solve Epson Surecolor P400 not connecting to wi-fi.
  • Place the printer within the range of the router.
  • Never place the machine in the vicinity of other electromagnetic devices to avoid Epson Surecolor P400 not connecting to wi-fi problem.
  • If you’re using the WPS method of connection, press the buttons on both the router and the Epson surecolor p400 setup printer within 2 minutes.
  • Deactivate the firewall and other anti-virus software on your router.
Setup Epson Printer