Epson Stylus C88 Driver

Driver files are available for both Windows and Mac. Apart from the printer driver that gets installed automatically, there is also a utility file available. The Epson Easy Photo Print utility allows you to layout and print digital images on various types of paper. Installing and updating drivers enable the smooth functioning of the printer. 

Epson Stylus C88 Manual

The manual is the guide explaining basic printer parts & functions to the user. Right from loading paper to configuring print settings, every procedure involved in the Epson Stylus c88 setup printer is explained. The OS requirements and safety instructions are also provided at the end of the guide. Download the manual here.  

Epson Stylus C88 Manual

Epson Stylus C88 Printer Setup

  • Peel off the sealing tape and discard them.
  • Attach the power cable and connect its other end to the wall outlet.
  • Push the Power button and turn it on.
  • Pull down the output tray and open the cover.
  • Open the ink cartridge cover and shake the new ink cartridges.
  • Unwrap the cartridges and then place them in the corresponding holders.
  • Press down the cartridges until they click well into place.
  • Shut down the ink cartridge cover and then the printer cover for Epson Stylus c88 setup.
  • Touch the Ink Drop button to charge the ink. Wait for 2 minutes
  • Pull the output tray out and slide the left guide to the extreme left.
  • Feed paper against the right edge guide.
  • Turn on the printer and insert the CD-ROM into the computer.
  • Agree to the terms and conditions of the License.
  • Reboot your computer once the driver is installed.
  • The setup is complete now, and the printer is ready to print.
epson stylus c88 printer troubleshooting

Epson Stylus C88 Wireless Printing

  • Turn on the printer and the printer.
  • Detach all the cables connected to the printer.
  • Feed sheets of plain paper into the printer for Epson Stylus c88 Wireless Printing.
  • Press the Document icon to receive the status sheet. Note down the PIN.
  • Push the Wi-Fi button down for 3 seconds. The Network status light flashes.
  • Register the PIN on the router within two minutes.
  • Both the orange and green lights flash simultaneously if the Epson Stylus c88 setup printer network connection is successful.

Epson Stylus C88 Reset

  • Push down the Power button of Epson Stylus c88 setup for five seconds.
  • See if the green light next to the Power button flashes twice.
  • Turn off the printer.
  • Pull out the printer cable from the printer’s rear.
  • Hold on for at least 20 seconds.
  • Plug the printer back into the wall socket and switch it on.
  • The printer is reset.
  • Configure the printer settings from scratch.

Epson Stylus C88 Printer Troubleshooting

Banding, blurring, and smearing of ink in the print output can be easily sorted out by changing a few Epson Stylus c88 setup printer settings. Print quality might also go down owing to the dried out ink cartridges. The red indicator blinks indicating ink depletion and paper jams. Some of the common printer issues and Epson Stylus c88 Printer troubleshooting mechanism are given below.

Epson Stylus c88 Printer Won’t Print

  • Download the Epson Connect Printer Setup Utility.
  • Mark the option I accept the terms in the License Agreement.
  • Click Install > Finish.
  • Pick your printer and then click Next.
  • Complete the printer registration process and hit Close.
  • See that the cable connections are secure to solve Epson Stylus c88 Printer Won’t Print.
  • Verify that the router’s signal strength is good.
  • Select this printer as the default one on your computer for Epson Stylus c88 Printer Troubleshooting.
  • Update the printer driver and clear all the print jobs in the queue.

Epson Stylus C88 Two Flashing Red Lights

  • Turn on the printer and open the printer cover for Epson Stylus c88 Printer Troubleshooting.
  • Press and release the Ink button.
  • A cartridge stops under the ink out mark and the power light flashes.
  • Press the Ink button again.
  • The printhead moves to the ink cartridge replacement position.
  • Pinch the tab of the empty cartridge and take it out of the printer.
  • Shake the new cartridge well and unpack it.
  • Thrust the cartridge until it clicks into place.
  • Shut down the ink cartridge cover and then the printer cover.
  • The Epson Stylus c88 setup printer begins to charge the ink delivery system. The red light stops flashing. 
  •