Epson Et 2760 Driver

The Drivers and Utilities Combo Package Installer file contains all the files required to use your Epson ET 2760 printer wired or wirelessly. It has a printer driver, scanner driver, Epson Event Manager, Scan 2 OCR Component, and Software Updater. Select the Download button below to download the printer driver file for your Operating System. Follow the installer’s instructions to install the driver application on your computer. 

Epson Et 2760 Manual

The printer manual has everything right from the basic printer functions to troubleshooting the printer issues. It also sheds light on refilling ink, adjusting print quality, and cleaning the printhead. The print quality, along with the print speed can be maintained in good condition if the issues are cleared soon. Hit the Download button to download Epson ET 2760 printer manual.  

Epson Et 2760 Unboxing

  Unpack the printer and set it up now. We have described in detail to guide you through the unboxing and printing process.

  • Unwrap the printer’s package and discard the protective materials from the printer.
  • Lift the ink tank cover and then open the cap for the black ink tank.
  • old the black ink bottle upright and remove its cap
  • Invert the bottle over the black ink tank.
  • he ink is filled to the line and stops automatically on reaching it.
  • lose the ink tank cap and keep the ink bottle aside for future use.
  • o as directed above for the other colored ink tanks as well.
  • Pull down the ink tank cover and the scanner unit.
  • ttach the power cord to the printer’s rear and an electrical outlet.
  • Lift the control panel and press the Power button to turn on the printer.
  • et your language on the LCD screen and proceed.
  • As soon as the Start Here sheet appears on the printer screen, press the OK button.
  • old the help button on the next screen for about 3 seconds.
  • ress the Start button to begin charging the ink.
  • ull down the ink tank cover and the scanner unit.
  • ead to Maintenance > Reset Ink Levels to reset the ink levels.
  • Adjust the print quality and continue to load paper.
  • Flip the feeder guard forward, raise the paper support, and tilt it backward slightly.
  • oad paper into it and adjust the guides against the stack.
  • et the paper settings on the printer’s control panel and install the printer driver.

Epson Et 2760 Wi-Fi Setup

  • Press the printer’s Home button and select Wi-Fi Setup.
  • Hit OK.
  • Navigate to select Wi-Fi(Recommended) and press OK twice.
  • With the arrow buttons, select Wi-Fi Setup Wizard and tap OK.
  • Pick the name of your wireless network and press OK.
  • If the network is not enlisted, enter it manually on the displayed keypad.
  • Press the Start button to print a network setup report.
  • Hit OK to exit the window.
  • View the Wi-Fi symbol on the printer’s LCD screen to confirm the successful network connection.
epson-et-2760-wi-fi-setup

Epson Et 2760 Duplex Printing 

  • Open the photo or document for printing on an application.
  • Select the print icon on the application.
  • Pick your printer’s name as the printer you want to use.
  • On the Main tab of the printer settings window, configure the printer settings.
  • Set the paper size, border, orientation, and paper type.
  • Select the Quality setting that you want in the print output.
  • Choose an option between Color or Black/Grayscale.
  • Hit 2-Sided printing if you want to print on both sides of the paper.
  • You get to see a preview with the Print Preview option.
  • Within the Settings option of the 2-Sided Printing feature, you can choose the Binding Edge, Binding Margin, Start Page, and Print Density.
  • Set the Adjustments options for the document and return to the Main tab.
  • Print a test copy and follow the on-screen instructions. 

How To Scan On Epson Et 2760

  • Open the document cover and keep the original document facedown on the scanner glass.
  • Move the original to the edges of the indicated corner.
  • Pull down the document cover gently to keep the original in position.
  • Confirm that you’ve installed the right printer software on your computer.
  • Establish a wireless network connection between the printer and the computer.
  • Restart the computer after installation to scan from the control panel.
  • Press the printer’s Home button.
  • Navigate with the arrow buttons and select Scan > Scan To > To Computer (PDF).
  • Pick the target computer from the list displayed.
  • Press the Start button on the printer to start scanning.

Epson Et 2760 Scan To Email

epson-et-2760-scan-to-email
  • Lift the document cover and position the original document on the scanner glass with the scannable side facing down.
  • Keep the original to the edges of the indicated corner.
  • Close the document cover gently.
  • Check if you’ve installed the right printer driver on your computer.
  • Set a wireless connection between the printer and the computer.
  • Reboot the computer after installation to scan from the printer’s control panel.
  • Tap the printer’s Home button.
  • Use the arrow buttons and choose Scan > Scan To > To Email.
  • The original document is scanned and attached to a message in your mail program.

Epson Et 2760 Troubleshooting

You can easily diagnose and detect printer problems with the error codes displayed as printer messages on the screen. Cross-check them against the conditions/solution section in the printer guide. Below are some of the frequent Epson ET 2760 errors encountered and their proven solutions.   

Epson Et 2760 Not Printing

  • See if the printer is turned on and connected to a working electric socket.
  • If connected by cables, attach them tightly at the ends of both the printer and the computer.
  • Remove any hub in between the printer and the computer.
  • Clear the errors displayed on the printer’s LCD.
  • Perform a printer check to see if a test page prints.
  • On your computer, verify that the printer driver is installed correctly.
  • Try printing the image/document at a lesser resolution.
  • Set your printer as the default printer on your Windows computer.
  • On a Mac computer, add this printer to the printer list.
  • Delete any print jobs from the Windows Spooler.
  • Go to Maintenance on your printer’s control panel and head to Print Queue.
  • Cancel any stalled print jobs.
  •  

Epson Et 2760 Not Printing Black

  • Switch off the printer and unplug from the power socket.
  • Reconnect the cables and switch on the printer.
  • Print a Quality Diagnostic Report.
  • Check the printer’s ink levels to view the ink volume.
  • Fill ink into the ink tanks that are low on ink.
  • Make sure that the printer’s printheads aren’t clogged.
  • Run automatic printhead cleaning twice or thrice.
  • Press Home > Setup > Maintenance > Printhead Nozzle Check.
  • Select Clean the printhead option and hit Continue.
  • Clean the printhead assembly with a paper towel to wipe any ink leaks.
  •  

Epson Et 2760 Not Connecting To Wi-Fi

  • Connect the wireless router to other devices and check the connection strength.
  • Keep the printer within the range of the printer.
  • Remove other electronic devices in the line of sight of the router and the printer.
  • See to there are no restrictions set on the wireless router.
  • If the network name is not displayed, enter the name manually.
  • Enter the password correctly as it is case-sensitive.
  • Check if the network settings are correct after printing a network status sheet.
  • Change the router port, access point, switch, or hub.

Epson Et 2760 Not Scanning

  • Restart the computer after installing the scanning software.
  • Disable the Firewall security on your computer temporarily.
  • Launch Epson Scan before scanning from the scanner button.
  • Try scanning at a lesser resolution than required.
  • Turn off the printer, router, and restart them and try scanning. 
  • On your Windows computer, navigate Start > Programs > EPSON > Epson Scan > Epson Scan Settings.
  • See that the network connection is strong between the router and the printer is strong.
  • Check if the interface cables are connected properly at both the devices.
  • Reinstall Epson Scan if the computer’s OS has been upgraded.
  •  
Setup Epson Printer